On this page
- What is a voiceover?
- Write the voiceover script first
- How to record a voiceover yourself
- How to make an AI voiceover with text to speech
- How to sync a voiceover with the video
- Get the voiceover volume right
- Add captions to the voiceover
- Make a narrated tutorial of a web app with AI
- Voiceover mistakes to avoid
- Questions
The short version
- 1Write the script first, one line for each thing that happens on screen, and time it.
- 2Record your own voice in a quiet, soft room, close to the microphone, in short takes.
- 3Or use an AI voice, once you've checked its pronunciation, its pacing and its license.
- 4In your video editor, start each line as the thing it describes happens.
- 5Keep the voice at one steady level, well above any music.
What is a voiceover?
A voiceover is narration you hear over the picture, from someone who isn't on screen. It's recorded separately from the video, usually after it, so you can rewrite a line, record it again or change the voice without touching the picture.
There are three ways to make one:
| Way | Best for | What you need |
|---|---|---|
| Record your own voice | ||
| Record your own voice | Most videos, especially when viewers know your voice | A microphone, a quiet room and a script |
| Use an AI voice | ||
| Use an AI voice | Videos you update often, or when you'd rather not narrate | A script and a text to speech tool |
| Have AI write and voice it | ||
| Have AI write and voice it | Tutorials of a web app | The page where the lesson starts, and a description of the lesson |
Write the voiceover script first
Made up on the spot, a voiceover talks over the moment that matters and fills the slow parts with “um”. Write it first: watch the video, or walk through the steps you'll record, and write one line for each thing that happens on screen.
- Write for the ear: short sentences, one idea each, in the words you'd say out loud.
- Name what's on screen exactly as it's labeled, so viewers can find it on theirs.
- Leave room for the picture. A page that takes three seconds to load needs three seconds without words.
- Time it. At a relaxed pace, people say about 130 to 150 words a minute. The free script timer shows how long yours takes to read aloud.
- 0:00Opening
- Here's how to export last month's invoices as a CSV file.
- 0:04Billing
- Open Billing in the sidebar. It lists every invoice.
- 0:09Filter
- Filter the list by last month. The Export button only appears once you do.
- 0:16Export
- Click Export, in the top-right corner, and choose CSV.
- 0:21Pause
- (Let the download start.)
- 0:24Ending
- That's it: the file is in your downloads, with one row per invoice.
For more timed scripts, see the video script templates, and for what to say at each step of a tutorial, the software tutorial video guide.
How to record a voiceover yourself
Pick a quiet, soft room
Soft things soak up echo: carpet, curtains, a sofa, a wardrobe full of clothes. Bare walls and hard floors bounce your voice back into the microphone, and that hollow sound is hard to remove later. Turn off fans and air conditioning, close the window and put your phone on silent.
Set up and check the microphone
A USB or headset microphone sounds better than a laptop's built-in one, because it's closer to you and hears less of the room. Put it about a hand's width from your mouth, slightly to one side so your breath doesn't hit it, and keep that distance for every take.
Check it with the free mic test, which shows whether it works and lets you hear how you sound. Listen on headphones: hiss, hum and echo are easier to fix now than in the edit.
Record in short takes
- Record one line or one step at a time, not the whole script in one go.
- Leave a second or two of silence before and after each take, so it's easy to trim and line up.
- If you stumble, pause and say the whole sentence again. Cut the bad one out later.
- Speak a little slower than feels natural, as if you were explaining it to one person.
- Read from the free online teleprompter, which scrolls the script at your pace.
Record with the free online voice recorder, which runs in your browser and downloads the file. Name each take after its line, such as 03-export.
Adding a voiceover to a screen recording?
How to make an AI voiceover with text to speech
A text to speech tool reads your script in a synthetic voice, and a changed line takes moments to redo. Most work the same way:
- Paste the script, a line or a paragraph at a time.
- Choose a voice and a language, and generate the audio.
- Listen to every line, fix what sounds wrong and generate it again.
- Download the audio and add it to your video like a recorded voice.
Before you use one, check these:
- Pronunciation. Product names, acronyms, numbers and web addresses are where voices slip. Spell a word the way it sounds, write numbers out as words, or use the tool's pronunciation settings if it has them.
- Pacing. Punctuation sets the pauses: a comma for a short one, a full stop or a new paragraph for a longer one. If a voice rushes, split long sentences in two.
- One voice throughout. Use the same voice and settings for every line, and regenerate whole sentences rather than patching in words.
- The license. Some tools allow commercial use only on paid plans, or ask you to credit them. Check that the terms cover commercial use and everywhere you'll publish, and whether you can keep using the audio if you cancel.
- Cloned voices. Clone only your own voice, or the voice of someone who has agreed to it in writing.
How to sync a voiceover with the video
Put the video on one track of your video editor and the voice on the track under it. Then:
- Cut the voice into one clip per line. If you recorded short takes, that's done already.
- Start each line as its moment begins, or a beat before: viewers should hear “click Export” as the pointer reaches the button, not after the page has changed.
- Even out the gaps. Where a line runs long, hold the picture with a freeze frame or slow it down. Where the picture runs long, leave a pause, or speed up a dull part such as a page loading.
- Watch it through without stopping. A late line or a dragging pause is easier to hear in one go than clip by clip.
Get the voiceover volume right
- Record at a safe level. Set the microphone's input so your loudest words stay out of the red on the meter. A recording that hits the top clips: it crackles, and no editor can repair it. A very quiet one isn't much better, because turning it up turns up the hiss too.
- Keep one steady level. Make every clip about as loud as the others before you add anything else. Your video editor can usually normalize the clips; otherwise, adjust each one by ear.
- Keep music well under the voice. It should be easy to ignore. Lower it further while someone is speaking, and choose tracks without lyrics, which compete with the words.
Then listen on laptop speakers, a phone and headphones: a mix that's clear on one can be lost on another.
Add captions to the voiceover
Captions help people who can't turn the sound on, can't hear it well or are listening in a second language. Your script is most of the text and your timeline has the times, but check them against what you actually said: takes rarely match the script word for word.
Keep them in a caption file, usually an SRT, or burn them into the picture for social feeds, where videos often start muted. How to add captions to a video covers both, step by step.
Make a narrated tutorial of a web app with AI
For a tutorial of a web app, AI can write and voice the whole thing. In SayScreen, you give it the page where the lesson starts and describe the lesson. Its AI drives a real Chrome browser through your app and writes the narration, and a natural AI voice speaks it, in a stock voice or your own cloned voice, in any of 94 languages. Then SayScreen edits the recording, with zooms, an animated cursor and click highlights, and captions if you want them.
To change a line afterward, rewrite it: it's re-voiced and the footage is re-timed around it, without recording again. You get an MP4 and an .srt caption file.
Describe the lesson instead of narrating it
$1 for your first 7 days, then $49 a month for 60 minutes of video, up to 8 minutes each. Cancel anytime.
Voiceover mistakes to avoid
- Making it up as you go instead of writing a script
- Talking so fast that the words get ahead of the picture
- Saying “click here” instead of the button's name
- Recording in a big room with bare walls
- Music as loud as the voice
- An AI voice that mispronounces your product's name
- Publishing with an AI voice whose license you haven't read
Questions
Write the script first, then record it yourself or turn it into speech with a text to speech tool. Import the video and the audio into a video editor, put the voice on its own track and slide each clip to the moment it describes. Keep any music well under the voice, add captions and export the video as a new file.
A voiceover is narration you hear over a video from someone who isn't on screen. It's recorded separately from the picture, usually afterward, and laid over it in the edit to explain what viewers are seeing. Tutorials, product demos, documentaries and ads all use one, and the voice can be your own or an AI voice made with text to speech.
Record the screen without talking, then write a script that follows it step by step. Record the voiceover in short takes while the recording plays, one step at a time. In your video editor, start each take just before the click it describes, and freeze or trim the picture wherever the voice needs more or less time.
Paste your script into a text to speech tool, choose a voice and generate the audio a line or a paragraph at a time. Listen for misread names, numbers and odd pauses, and fix them by respelling words or changing the punctuation. Check that the license covers commercial use, then add the audio to your video like a recorded voice.
Cut the voiceover into one clip per line, then place each clip on your editor's timeline so it starts as the action it describes starts, or a beat before. Where a line runs long, hold or slow the picture; where the picture runs long, leave a pause. Then watch the whole video without stopping to check the timing.
A microphone close to your mouth, a quiet room with soft furnishings, headphones to check the sound and a script. A USB or headset microphone sounds better than a laptop's built-in one, but the room matters more than the price of the microphone. A free online voice recorder in your browser is enough to start.