On this page
The short version
- 1A screencast is a recording of a screen, usually narrated, made to explain something.
- 2Unlike a screenshot it moves, and unlike a plain screen recording it's planned and explained.
- 3To make one: plan it, set up the screen, record, narrate, edit and export an MP4.
- 4You need a screen recorder, a microphone and a quiet room. A browser recorder is enough to start.
- 5Keep it short: one task, usually one to three minutes.
What a screencast is
A screencast is a video recording of a computer screen, usually with a voice explaining what's happening, made to teach or show something. The viewer watches the screen change as the person recording clicks, types and scrolls, and hears what each step is for.
A typical screencast has:
- The screen, or one window of it, with the cursor in view.
- A voice, recorded at the same time or added afterward.
- Edits that make it easy to follow: mistakes trimmed, zooms on small details, captions.
- Sometimes a webcam view of the speaker in a corner.
Because viewers can pause and replay any step, a screencast works well for teaching. It doesn't have to be long or elaborate. A one-minute recording that shows a colleague where a setting is counts, as long as it's made to explain.
Screencast vs screen recording vs screenshot
The three terms get mixed up. The difference is what each one is made for.
What it is
- Screencast
- A narrated video of a screen
- Screen recording
- Any video of a screen
- Screenshot
- A still picture of a screen
Sound
- Screencast
- Usually a voice explaining
- Screen recording
- Optional, often none
- Screenshot
- None
Made to
- Screencast
- Teach or explain
- Screen recording
- Capture what happened
- Screenshot
- Show one moment
Planned and edited
- Screencast
- Usually
- Screen recording
- Rarely
- Screenshot
- Sometimes cropped or marked up
Best for
- Screencast
- Tutorials, walkthroughs, how-to answers
- Screen recording
- Bug reports, saved meetings, quick clips
- Screenshot
- An error message, a setting, a layout
| Screencast | Screen recording | Screenshot | |
|---|---|---|---|
| What it is | A narrated video of a screen | Any video of a screen | A still picture of a screen |
| Sound | Usually a voice explaining | Optional, often none | None |
| Made to | Teach or explain | Capture what happened | Show one moment |
| Planned and edited | Usually | Rarely | Sometimes cropped or marked up |
| Best for | Tutorials, walkthroughs, how-to answers | Bug reports, saved meetings, quick clips | An error message, a setting, a layout |
Every screencast is a screen recording, but not every screen recording is a screencast. Use a screenshot when one picture answers the question, and a screencast when the order of the steps matters.
A GIF sits in between: it moves like a screencast but has no sound, so it suits one small action in documentation. A video tutorial is a kind of screencast, one that teaches a task step by step.
What screencasts are used for
Anything that's quicker to show on a screen than to describe in writing:
- Software tutorials that take someone through one task. The software tutorial video guide covers them in depth.
- Onboarding and training, for new users or new staff.
- Answers to support questions, sent as a link instead of a long email.
- Product demos that show what a feature does before someone tries it.
- Lessons, such as working through a spreadsheet, a design or a piece of code.
- Bug reports and code reviews, where your voice explains what you expected to happen.
Because it's recorded, a screencast also saves you repeating yourself: explain it once, then send the link each time someone asks.
How to make a screencast, step by step
- Plan it. Decide who it's for and what they should be able to do at the end. Write the steps down in order, with the one thing worth warning about. A list of steps is enough for a short screencast; for anything longer, write a script, starting from one of the video script templates.
- Set up the screen. Close everything you don't need, turn notifications off and use sample data instead of real accounts. Record one window about 1280 pixels wide, and zoom in if the text is small. The free screen resolution checker shows your screen and window size.
- Record. Start the recorder, pick the window, and record one step at a time with a pause between steps. Move the mouse slowly and rest it on each button before you click.
- Narrate. Talk as you go, naming each button as you click it, or record the screen silently and add your voice afterward while you watch it back. Say why, not only where.
- Edit. Trim the start and the end, cut mistakes and long waits, zoom in on small details and add captions.
- Export. Save an MP4, which plays almost everywhere, at 1080p if your recorder offers it. Keep the caption file with it, usually an .srt, for players that show their own captions. For documentation or a chat, turn a few seconds into a GIF with the free video to GIF converter.
Screencast software, and what else you need
Three things, and you may already have all of them:
- A screen recorder. The one built into your computer is enough to start: see how to screen record on Windows, on a Mac or on a Chromebook. The free online screen recorder runs in your browser, with nothing to install and no watermark. Desktop recording apps add editing, zooms and webcam overlays when you need them.
- A microphone. A headset or a USB microphone close to your mouth sounds clearer than a laptop's built-in one. Check yours with the free mic test before a long recording.
- A quiet room. Close the door and the windows, silence your phone, and record somewhere with soft furnishings, which soak up echo.
For anything longer than a quick clip, you'll also want a video editor that can trim, zoom and add captions. A webcam is optional: a small view of your face in a corner suits a lesson or a personal message, but people following steps are watching the screen. How to screen record compares the ways to record on each computer, with your voice and without.
Record ten seconds first
How long should a screencast be?
As short as the job allows. As a rule of thumb:
- A quick answer for a colleague or a customer: under a minute.
- One task, such as a tutorial: one to three minutes.
- A bigger topic: parts of a few minutes each, each ending with something done.
If you narrate from a script, a speaking pace of 130 to 150 words a minute is a fair rule of thumb, so a two-minute screencast is about 260 to 300 words. Pauses while the screen loads make it run longer. If it runs long, cut the introduction first, then anything you said twice.
Make a screencast of a web app with AI
If your screencast shows a web app, you can skip the recording and the narrating. In SayScreen, you give it the page where the screencast starts and describe what to show. Its AI uses the app in a real browser, reads each screen, decides where to click and writes the narration, and a natural AI voice speaks it, in a stock voice or your own cloned voice. It edits the recording with smooth zooms, an animated cursor and click highlights, with captions if you want them, and you get an MP4 and an .srt file. Rewrite any line afterward and it's re-voiced and re-timed, without recording again.
Describe the screencast instead of recording it
$1 for your first 7 days, then $49 a month for 60 minutes of video, up to 8 minutes each. Cancel anytime.
Tips for a clear screencast
- Say what the viewer will be able to do in the first sentence, then start.
- Read your script or steps aloud once before recording, and rewrite what you stumble on.
- Say each button's name as it appears on screen, then click it.
- Pause for a beat after each click, so people can see what changed.
- Keep the cursor still when you're not using it.
- Use sample data, and check every frame for names and email addresses.
- End on the finished result, not on a menu.
- A long greeting before the first step
- A large screen with tiny text
- Notifications popping up mid-recording
- Apologizing for mistakes instead of cutting them
Questions
A screencast is a video recording of a computer screen, usually with narration, made to explain something: how to use a feature, how to fix a problem or how a piece of work fits together. Viewers watch the screen change step by step and can pause or replay any part, which makes it a good fit for tutorials and walkthroughs.
Every screencast is a screen recording, but not every screen recording is a screencast. A screen recording is any video capture of a screen, such as a bug report or a saved meeting. A screencast is planned, and usually narrated and edited, because it's made to teach or explain something to the people watching.
A screenshot is a still picture of the screen at one moment. A screencast is a video of the screen over time, usually with a voice explaining it. Use a screenshot when one picture answers the question, such as where a setting is, and a screencast when people need to see the steps in order.
Write down the steps you'll show, close everything you don't need and turn notifications off. Record one window with your microphone on, one step at a time, naming each button as you click it, or add your voice afterward. Then trim the ends, cut mistakes and long waits, add captions and export an MP4.
A screen recorder and a microphone, plus a video editor for anything longer than a quick clip. The recorder built into your computer, or one that runs in your browser, is enough to start. A headset or a USB microphone close to your mouth sounds clearer than a laptop's built-in one.
As short as the job allows. As a rule of thumb, a quick answer for a colleague runs under a minute, and a screencast that teaches one task runs one to three minutes. If yours goes past five minutes, split it into parts that each end with something done.